EN Standarder

EN 3-8:2006
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
EN 3-8:2006/AC:2007
EN 19:2002
Industrial valves - Marking of metallic valves
EN 267:2009
Automatic forced draught burners for liquid fuels
EN 287-1:2004
Qualification test of welders - Fusion welding - Part 1: Steels
EN 287-1:2004/A2:2006
EN 287-1:2004/AC:2004
EN 334:2005+A1:2009
Gas pressure regulators for inlet pressures up to 100 bar
EN 378-2:2008+A1:2009
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 473:2008
Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 593:2009+A1:2011 (new)
Industrial valves - Metallic butterfly valves
EN 676:2003+A2:2008
Automatic forced draught burners for gaseous fuels
EN 676:2003+A2:2008/AC:2008
EN 764-5:2002
Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
EN 764-7:2002
Pressure equipment - Part 7: Safety systems for unfired pressure equipment
EN 764-7:2002/AC:2006
EN 1057:2006+A1:2010
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1092-1:2007
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 1092-3:2003
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
EN 1092-3:2003/AC:2007
EN 1092-4:2002
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 1171:2002
Industrial valves - Cast iron gate valves
EN 1252-1:1998
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
EN 1252-1:1998/AC:1998
EN 1252-2:2001
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C
EN 1349:2009
Industrial process control valves
EN 1515-4:2009
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 1562:1997
Founding - Malleable cast irons
EN 1562:1997/A1:2006
EN 1563:1997
Founding - Spheroidal graphite cast irons
EN 1563:1997/A1:2002
EN 1563:1997/A2:2005
EN 1564:1997
Founding - Austempered ductile cast irons
EN 1564:1997/A1:2006
EN 1591-1:2001+A1:2009
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
EN 1591-1:2001+A1:2009/AC:2011 (new)
EN 1626:2008
Cryogenic vessels - Valves for cryogenic service
EN 1653:1997
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
EN 1653:1997/A1:2000
EN 1759-3:2003
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
EN 1759-3:2003/AC:2004
EN 1759-4:2003
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1797:2001
Cryogenic vessels - Gas/material compatibility
EN 1866:2005
Mobile fire extinguishers
EN 1983:2006
Industrial valves - Steel ball valves
EN 1984:2010
Industrial valves - Steel gate valves
EN ISO 4126-1:2004
Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004)
EN ISO 4126-1:2004/AC:2006
EN ISO 4126-3:2006
Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
EN ISO 4126-4:2004
Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004)
EN ISO 4126-5:2004
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004)
EN ISO 4126-5:2004/AC:2008
EN ISO 9606-2:2004
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 9606-3:1999
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN ISO 9606-4:1999
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN ISO 9606-5:2000
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
EN 10028-1:2007+A1:2009
Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-1:2007+A1:2009/AC:2009
EN 10028-2:2009
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2009
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-4:2009
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-5:2009
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-6:2009
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-7:2007
Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10204:2004
Metallic products - Types of inspection documents
EN 10213:2007
Steel castings for pressure purposes
EN 10213:2007/AC:2008
EN 10216-1:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10216-1:2002/A1:2004
EN 10216-2:2002+A2:2007
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10216-3:2002/A1:2004
EN 10216-4:2002
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-4:2002/A1:2004
EN 10216-5:2004
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10216-5:2004/AC:2008
EN 10217-1:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10217-1:2002/A1:2005
EN 10217-2:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-2:2002/A1:2005
EN 10217-3:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10217-3:2002/A1:2005
EN 10217-4:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-4:2002/A1:2005
EN 10217-5:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005
EN 10217-6:2002
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-6:2002/A1:2005
EN 10217-7:2005
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
EN 10222-1:1998
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
EN 10222-1:1998/A1:2002
EN 10222-2:1999
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties
EN 10222-2:1999/AC:2000
EN 10222-3:1998
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 10222-4:1998
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-4:1998/A1:2001
EN 10222-5:1999
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10222-5:1999/AC:2000
EN 10253-2:2007
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 10253-4:2008
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-4:2008/AC:2009
EN 10269:1999
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10269:1999/A1:2006
EN 10269:1999/A1:2006/AC:2008
EN 10272:2007
Stainless steel bars for pressure purposes
EN 10273:2007
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10305-4:2011 (new)
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-6:2005
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 10931:2005
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)
EN 12178:2003
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
EN 12263:1998
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
EN 12266-1:2003
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN 12284:2003
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
EN 12288:2010
Industrial valves - Copper alloy gate valves
EN 12334:2001
Industrial valves - Cast iron check valves
EN 12334:2001/A1:2004
EN 12334:2001/AC:2002
EN 12392:2000
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
EN 12420:1999
Copper and copper alloys - Forgings
EN 12434:2000
Cryogenic vessels - Cryogenic flexible hoses
EN 12434:2000/AC:2001
EN 12451:1999
Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 12452:1999
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 12516-1:2005
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
EN 12516-1:2005/AC:2007
EN 12516-2:2004
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 12516-3:2002
Valves - Shell design strength - Part 3: Experimental method
EN 12516-3:2002/AC:2003
EN 12516-4:2008
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 12542:2010
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 12735-1:2010
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
EN 12735-2:2010
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
EN 12778:2002
Cookware - Pressure cookers for domestic use
EN 12778:2002/A1:2005
EN 12778:2002/AC:2003
EN 12952-1:2001
Water-tube boilers and auxiliary installations - Part 1: General
EN 12952-2:2001
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 12952-3:2001
Water-tube boilers and auxilliary installations - Part 3: Design and calculation for pressure parts
EN 12952-5:2001
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 12952-6:2002
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
EN 12952-7:2002
Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 12952-8:2002
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
EN 12952-9:2002
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
EN 12952-10:2002
Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure
EN 12952-11:2007
Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
EN 12952-14:2004
Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution
EN 12952-16:2002
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
EN 12953-1:2002
Shell boilers - Part 1: General
EN 12953-2:2002
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12953-3:2002
Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-4:2002
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
EN 12953-5:2002
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
EN 12953-6:2011 (new)
Shell Boilers - Part 6: Requirements for equipment for the boiler
EN 12953-7:2002
Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
EN 12953-8:2001
Shell boilers - Part 8: Requirements for safeguards against excessive pressure
EN 12953-8:2001/AC:2002
EN 12953-9:2007
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
EN 12953-12:2003
Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
EN 13121-1:2003
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
EN 13121-2:2003
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
EN 13121-3:2008+A1:2010 (new)
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 13121-3:2008+A1:2010/AC:2011 (new)
EN 13133:2000
Brazing - Brazer approval
EN 13134:2000
Brazing - Procedure approval
EN 13136:2001
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
EN 13136:2001/A1:2005
EN 13175:2003+A2:2007
LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13348:2008
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 13371:2001
Cryogenic vessels - Couplings for cryogenic service
EN 13397:2001
Industrial valves - Diaphragm valves made of metallic materials
EN 13445-1:2009
Unfired pressure vessels - Part 1: General
EN 13445-2:2009
Unfired pressure vessels - Part 2: Materials
EN 13445-3:2009
Unfired pressure vessels - Part 3: Design
EN 13445-4:2009
Unfired pressure vessels - Part 4: Fabrication
EN 13445-5:2009
Unfired pressure vessels - Part 5: Inspection and testing
EN 13445-6:2009
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-8:2009
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13458-1:2002
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
EN 13458-2:2002
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 13458-2:2002/AC:2006
EN 13458-3:2003
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
EN 13458-3:2003/A1:2005
EN 13480-1:2002
Metallic industrial piping - Part 1: General
EN 13480-1:2002/A1:2005
EN 13480-1:2002/A2:2008
EN 13480-2:2002
Metallic industrial piping - Part 2: Materials
EN 13480-2:2002/A2:2010
EN 13480-2:2002/A1:2010
EN 13480-3:2002
Metallic industrial piping - Part 3: Design and calculation
EN 13480-3:2002/A4:2010
EN 13480-3:2002/A1:2005
EN 13480-3:2002/A2:2006
EN 13480-3:2002/A3:2009
EN 13480-4:2002
Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-5:2002
Metallic industrial piping - Part 5: Inspection and testing
EN 13480-6:2004
Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-6:2004/A1:2005
EN 13480-8:2007
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 13611:2007
Safety and control devices for gas burners and gas burning appliances - General requirements
EN 13648-1:2008
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 13648-2:2002
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
EN 13648-3:2002
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
EN 13709:2010
Industrial valves - Steel globe and globe stop and check valves
EN 13789:2010
Industrial valves - Cast iron globe valves
EN 13799:2002
Contents gauges for LPG tanks
EN 13799:2002/AC:2007
EN 13831:2007
Closed expansion vessels with built in diaphragm for installation in water
EN 13835:2002
Founding - Austenitic cast irons
EN 13835:2002/A1:2006
EN 13923:2005
Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN 14071:2004
Pressure relief valves for LPG tanks - Ancillary equipment
EN 14129:2004
Pressure relief valves for LPG tanks
EN 14197-1:2003
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
EN 14197-2:2003
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 14197-2:2003/A1:2006
EN 14197-2:2003/AC:2006
EN 14197-3:2004
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
EN 14197-3:2004/A1:2005
EN 14197-3:2004/AC:2004
EN 14222:2003
Stainless steel shell boilers
EN 14276-1:2006+A1:2011 (new)
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
EN 14276-2:2007+A1:2011 (new)
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
EN 14341:2006
Industrial valves - Steel check valves
EN 14359:2006+A1:2010
Gas-loaded accumulators for fluid power applications
EN 14382:2005+A1:2009
Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
EN 14382:2005+A1:2009/AC:2009
EN 14394:2005+A1:2008
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 14570:2005
Equipping of LPG tanks, overground and underground
EN 14570:2005/A1:2006
EN 14585-1:2006
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
EN 14917:2009
Metal bellows expansion joints for pressure applications
EN 15001-1:2009
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 15493:2003
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)
EN ISO 15494:2003
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003)
EN ISO 15613:2004
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN ISO 15614-1:2004
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
EN ISO 15614-1:2004/A1:2008
EN ISO 15614-2:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 15614-2:2005/AC:2009
EN ISO 15614-4:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
EN ISO 15614-4:2005/AC:2007
EN ISO 15614-5:2004
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN ISO 15614-6:2006
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 15614-7:2007
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007)
EN ISO 15614-8:2002
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
EN ISO 15614-11:2002
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 15620:2000
Welding - Friction welding of metallic materials (ISO 15620:2000)
EN 15776:2011 (new)
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
EN ISO 16135:2006
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
EN ISO 16136:2006
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
EN ISO 16137:2006
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
EN ISO 16138:2006
Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
EN ISO 16139:2006
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
EN ISO 21787:2006
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)